Product Description
Composed of acrylic resin, chlorinated plasticizer, thixotropic agent, anti settling agent, pigments and fillers, solvents, etc., it belongs to the physical drying type, and the paint film is resistant to wear and collision; Resistant to seawater, mineral oil, and other animal and vegetable oils, with a semi gloss and excellent color retention.
Design purpose
The topside, waterline, and superstructure of the ship shall be painted with topcoat, while other metal structures and concrete shall be painted with anti-corrosion topcoat.
Physical parameters
Color: White Orange Orange Red Iron Red Large Red Light Grey Medium Grey Blue Grey Light Green Black
Gloss: Semi gloss
Theoretical coating rate: 175-220g/㎡, 5.71 ㎡/L (based on 50 μ M dry film meter, excluding losses)
Specific gravity: approximately 1.00-1.25
Drying time: (23 ± 2 ℃) Surface drying ≤ 2h, actual drying ≤ 8h
Flash point: 25 ℃
Storage period: 12 months
Construction instructions
Mixing ratio: single can
Maturation time: Open and stir well before use
Applicable period: unlimited
Construction method: high-pressure airless spraying, air spraying, manual brushing, roller coating
Diluent: X-14 Chlorinated rubber coating diluent
|
|
High pressure airless spraying |
Aerated spraying |
Manual brushing and roller coating |
|
Maximum dilution amount |
5% |
10% |
3% |
| orifice |
0.4-0.5mm |
2.0-2.5mm |
- |
|
Ejection pressure |
15-20MPa |
0.3-0.5MPa |
- |
Tool cleaning X-14 chlorinated rubber coating thinner
Paint film thickness Wet film: 175 μ m. Dry film: 50 μ M
Painting interval
|
Substrate temperature |
0℃ |
20℃ |
30℃ |
| shortest |
24h |
8h |
6h |
| longest |
unlimited |
||
surface treatment
If the previous paint surface has been contaminated, appropriate methods should be used to remove grease and dust, or this paint thinner can be used to scrub.
Construction conditions: The temperature of the substrate must be 3 ℃ above the dew point, and the relative humidity must be less than 85%.
Front matching coatings: C181 chlorinated rubber iron red anti-corrosion primer, C182 chlorinated rubber cloud iron anti-corrosion intermediate paint, C08-8 two component epoxy cloud iron intermediate paint, etc.
Packaging specification: 20 kilograms in a 20 liter container for component A.
security
Avoid long-term inhalation of solvent vapors or paint mist, and do not come into contact with skin or eyes. When working in narrow or poorly ventilated areas, strong ventilation must be provided, and even if the ventilation conditions are good, protective equipment should be worn.
Notes
The above dry and wet film thickness refers to the indicators during high-pressure airless spraying;
The data related to this manual was obtained in the laboratory, and the actual product may differ slightly from it;
If there are any changes to the above data, the latest manual of our company shall prevail without prior notice.
