Composed of chlorinated rubber, pigments, plasticizers, additives, solvents, etc., the paint film is tough and has excellent weather and water resistance, as well as certain chemical resistance properties.
Design purpose
Ships, containers, port machinery, various steel structures, and concrete as topcoats.
Physical parameters
Color: White cream, yellow sea blue, gray green, medium green, light gray, large red, iron red, silver white. Various colors can also be customized according to the user's specified color card.
Gloss: Semi gloss
Theoretical coating rate: 125-156g/㎡, 8.00 ㎡/L (based on 40 μ M dry film meter, excluding losses)
Specific gravity: approximately 1.00-1.25
Drying time: 23 ± 2 ℃: surface dry ≤ 2h, solid dry ≤ 8h
Flash point: 38 ℃
Storage period: 12 months
Construction instructions
Mixing ratio: single can
Maturation time: Open and stir well before use
Applicable period: unlimited
Construction method: high-pressure airless spraying, air spraying, manual brushing, roller coating
Diluent: X-14 Chlorinated rubber coating diluent
|
|
High pressure airless spraying |
Aerated spraying |
Manual brushing and roller coating |
|
Maximum dilution amount |
5% |
10% |
3% |
| orifice |
0.4-0.5mm |
2.0-2.5mm |
- |
|
Ejection pressure |
12-15MPa |
0.3-0.4MPa |
- |
Tool cleaning X-14 chlorinated rubber coating thinner
Paint film thickness Wet film: 125 μ m. Dry film: 40 μ M
Painting interval
|
Substrate temperature |
0℃ |
20℃ |
30℃ |
| shortest |
24h |
8h |
6h |
|
longest |
unlimited |
||
Surface treatment: If the previous paint surface has been contaminated, appropriate methods should be used to remove grease and dust, or this paint thinner can be used to scrub.
Construction conditions: The temperature of the substrate must be 3 ℃ above the dew point, and the relative humidity must be less than 85%.
Front matching coatings: C181 chlorinated rubber iron red anti-corrosion primer, C182 chlorinated rubber cloud iron anti-corrosion intermediate paint, C08-8 epoxy cloud iron intermediate paint, etc.
Packaging specification: 20 kilograms in a 20 liter container.
security
Avoid long-term inhalation of solvent vapors or paint mist, and do not come into contact with skin or eyes. When working in narrow or poorly ventilated areas, strong ventilation must be provided, and even if the ventilation conditions are good, protective equipment should be worn.
Notes
The above dry and wet film thickness refers to the indicators during high-pressure airless spraying;
The data related to this manual was obtained in the laboratory, and may vary slightly during actual use due to changes in environmental conditions;
If there are any changes to the above data, the latest manual of our company shall prevail without prior notice.
