Composed of epoxy resin and vegetable oil after acetylation, with the addition of iron oxide red, zinc chromium yellow, drying agent, and solvent, the paint film is tough and durable, with good adhesion. If used in conjunction with phosphating primer, it can improve moisture resistance and salt spray resistance.
Design purpose
Suitable for coating ferrous or non-ferrous metal surfaces.
Physical parameters
Color: Iron Red
Gloss: Matte
Theoretical coating rate: 160g/㎡, 8.13 ㎡/L (based on 40 μ M dry film meter, excluding losses)
Specific gravity: approximately 1.30
Drying time: 23 ± 2 ℃: surface drying ≤ 4 hours, solid drying ≤ 24 hours
Flash point: 30 ℃
Storage period: 12 months
Construction instructions
Mixing ratio: single can
Maturation time: Open and stir well before use
Applicable period: unlimited
Construction method: high-pressure airless spraying, air spraying, manual brushing, roller coating
Diluent: X-7 epoxy coating diluent
|
|
High pressure airless spraying |
Aerated spraying |
Manual brushing and roller coating |
|
Maximum dilution amount |
5% |
10% |
3% |
|
orifice |
0.43-0.48mm |
2.0-2.5mm |
- |
|
Ejection pressure |
12-15MPa |
0.3-0.4MPa |
- |
Tool cleaning X-7 epoxy coating thinner
Paint film thickness Wet film: 120 μ m. Dry film: 40 μ M
Painting interval
|
Substrate temperature |
5℃ |
20℃ |
30℃ |
|
shortest |
36h |
24h |
16h |
| longest |
unlimited |
||
surface treatment
Steel with oxide skin: needs to be shot blasted or sandblasted to the Swedish rust removal standard Sa2 level;
Oxygenated skin free steel: ground to St3 grade using pneumatic or electric elastic grinding wheels;
Steel coated with workshop primer: secondary rust removal is carried out using mild sandblasting or pneumatic (electric) elastic grinding wheels, meeting the Swedish rust removal standard St3 level.
Construction conditions: The temperature of the substrate must be 3 ℃ above the dew point, and the relative humidity must be less than 85%.
Rear supporting coatings: C14 alkyd mixed paint, C22 alkyd enamel (weather resistant), etc.
Packaging specification: 20 kilograms in an 18.5-liter container.
security
Avoid long-term inhalation of solvent vapors or paint mist, and do not come into contact with skin or eyes. When working in narrow or poorly ventilated areas, strong ventilation must be provided, and even if the ventilation conditions are good, protective equipment should be worn.
Notes
The above dry and wet film thickness refers to the indicators during high-pressure airless spraying;
The data related to this manual was obtained in the laboratory, and the actual product may differ slightly from it;
If there are any changes to the above data, the latest manual of our company shall prevail without prior notice.
