It is prepared from refined vegetable oil modified pentaerythritol acid resin, pigments, drying agents, various additives, and solvents, among which silver powder alkyd enamel is packaged in two components: A and B. It has good outdoor weather resistance, good adhesion, and physical and mechanical properties, and can be dried at room temperature or low temperature.
Design purpose
Suitable for outdoor steel and wood surfaces as protective and decorative coatings.
Physical parameters
Color: Refer to Chende Paint Color Card
Gloss: Shiny
Theoretical coating rate: 90g/㎡, 12.78m2/L (based on 30 μ M dry film meter, excluding losses)
Specific gravity: approximately 1.15
Drying time: 23 ± 2 ℃: surface dry ≤ 5h, solid dry ≤ 18h
Flash point: 35 ℃
Storage period: 12 months
Construction instructions
Mixing ratio: Silver pink: Component A: Component B=7:3 Others are single canned
Maturation time: Open the stirring hook to use
Applicable period: unlimited
Construction method: high-pressure airless spraying, air spraying, manual brushing, roller coating
Diluent: X-6 Alkyd Paint Diluent
|
|
High pressure airless spraying |
Aerated spraying |
Manual brushing and roller coating |
|
Maximum dilution amount |
5% |
10% |
3% |
| orifice |
0.4-0.5mm |
2.0-2.5mm |
- |
|
Ejection pressure |
12-15MPa |
0.3-0.4MPa |
- |
Tool cleaning: X-6 alkyd paint thinner
Paint film thickness: Wet film: 75 μ m. Dry film: 30 μ M
Painting interval
|
Substrate temperature |
5℃ |
20℃ |
30℃ |
| shortest |
48h |
24h |
16h |
|
longest |
unlimited | ||
Surface treatment: If the previous paint surface has been contaminated, appropriate methods should be used to remove grease and dust, or this paint thinner can be used to scrub.
Construction conditions: The temperature of the substrate must be 3 ℃ above the dew point, and the relative humidity must be less than 85%.
Front matching coatings: C06-1 iron red alkyd primer, C53-31 red lead alkyd anti rust paint, C141-4 alkyd mica iron intermediate paint, C141-5 iron red alkyd aluminum powder anti rust paint.
Packaging specification: 20 kilograms in an 18.5-liter container; The silver pink component A is packaged in a 20 liter container of 16 kilograms, while the component B is packaged in a 10 liter container of 6.8 kilograms (when using, weigh the corresponding component A according to the ratio).
security
Avoid long-term inhalation of solvent vapors or paint mist, and do not come into contact with skin or eyes. When working in narrow or poorly ventilated areas, strong ventilation must be provided, and even if the ventilation conditions are good, protective equipment should be worn.
Notes
The above dry and wet film thickness refers to the indicators during high-pressure airless spraying;
The data related to this manual was obtained in the laboratory, and the actual product may differ slightly from it;
If there are any changes to the above data, the latest manual of our company shall prevail without prior notice.
